Search
Languages

Bourns Expands Line of 1210-Size Automotive Grade Common Mode Chip Inductors

New compact and rugged inductors feature low radiation and high impedance over a broad frequency range delivering excellent EMI suppression

RIVERSIDE, Calif., August 3, 2021 - Bourns, Inc., a leading manufacturer and supplier of electronic components, today announced the expansion of its line of 1210-size automotive grade common mode chip inductors. The new Model SRF3225TABM and SRF3225TAFD common mode chip inductor series offer low radiation and high impedance over a broad frequency range to suppress Electromagnetic Interference (EMI) coming into or leaving the system. The new series filters complement Bourns' existing common mode chip inductor portfolio, and support higher data rate two wire bus systems in automotive, industrial and other electronic applications. The two new compact-sized series of Bourns® common mode inductors are designed with a ferrite core and are bifilar-wound to deliver a shielded construction with superior common mode noise suppression.

The inductor core features a 0.3 mm minimum height sidewall terminal at each end designed to help enhance the component's mechanical strength after it is assembled on the board. Both model series are AEC-Q200 compliant providing high reliability and durability. The Model SRF3225TABM-201Y is specifically designed to meet Open Alliance IEEE 100Base-T1 requirements, and Model SRF3225TAFD-101Y is well-suited for common mode noise suppression in typical CAN and higher data rate IEC 62228-3 CAN-FD Class II transmission systems. This model also supports differential to common mode rejection (DCMR) for CAN FD Class III.

The Bourns® Model SRF3225TABM and SRF3225TAFD series are available now and are RoHS compliant* and halogen free**. For additional product information, please see: www.bourns.com/products/magnetic-products/common-mode-chip-inductors-aec-q200-compliant

*RoHS Directive 2015/863, Mar 31, 2015 and Annex.

**Bourns considers a product to be "halogen free" if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.

About Bourns

Bourns, Inc., is a leading manufacturer and supplier of position and speed sensors, circuit protection solutions, magnetic components, microelectronic modules, panel controls and resistive products. Headquartered in Riverside, California, USA, Bourns serves a broad range of markets, including automotive, industrial, consumer, communications, non-critical life support medical (low/medium risk), audio and various other market segments. Additional company and product information is available at www.bourns.com.

Bourns® and the Bourns logo are registered trademarks of Bourns, Inc. and may be used only with the permission of Bourns and proper acknowledgement. Other listed names and brands are trademarks or registered trademarks of their respective owners.

Bourns® products have not been designed for and are not intended for use in "lifesaving," "life-critical" or "life-sustaining" applications nor any other applications where failure or malfunction of the Bourns® product may result in personal injury or death. See Legal Disclaimer Notice www.bourns.com/docs/legal/disclaimer.pdf

Agency Contact:
Annette Keller
Keller Communication
annettekeller1984@gmail.com
Company Contact:
David Scofield
Bourns, Inc.
(951) 781-5054
david.scofield@bourns.com
Please take a quick survey
Quick survey  
Opt out

Bourns Web Survey

Please answer as many questions as you can with 1 being unfavorable and 5 most favorable.
How easy was it to find what you were looking for on our website?
How satisfied are you with the content?
Did it take you more or less time than you expected to find what you were looking for?
How likely is it that you will recommend our website to a friend or colleague?
 
(Please include your email address if you have any questions.)